#WHERE TO BUY REJEX WAX FREE#

After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth.

For larger vehicles such as RVs, busses and yachts, a good trick for dealing with hot days is to apply RejeX to the top and western facing side in the morning and the eastern facing side in the afternoon, so that you're always working on the shady side. On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F.

Apply to a clean, dry surface that is cool to the touch.

Abrasive cleaners, polishes or rubbing compounds will remove the RejeX film.

If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required.It should also be noted that many waxes (particularly those products described as 'restorer waxes') and all polishes contain abrasives, which can strip the thin RejeX film. Waxes can be applied over RejeX, however many of the benefits of RejeX may be negated and the wax finish will typically not last very long due to adhesion limitations. RejeX can be used over existing wax, however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly.RejeX can be applied in multiple coats – allowing at least 4 hours curing time between coats – for greater depth of gloss and extended longevity.If you use a buffer, do not apply RejeX with pressure, simply use the buffer to spread out (and/or wipe off) the product. If a painted / gelcoat surface is worn/oxidized, polish to remove 'dead' oxidized paint and gel coat / fiberglass before applying RejeX.īuffers work just fine for applying / removing RejeX. RejeXSHOULD NOTbe used on porous surfaces, highly textured surfaces (such as the plastic/rubber trim on some SUVs), oxidized painted surfaces or oxidized (chalky) gelcoat/fiberglass.before it has cured, the contaminants may interfere with the integrity of the film, affecting its visual characteristics and release properties. If the coating is exposed to contamination such as oil, fuel, soot, hard water, cleaners, etc. It is very important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. As RejeX cures, the polymers cross-link into a crystal-clear, flexible, chemical- and contaminant-resistant film.

#WHERE TO BUY REJEX WAX FREE#

RejeX contains none of the free silicone oils found in some other polymer products that are known to contaminate paint and cause issues when repainting. RejeX has recently been awarded the GSA National Stock Number 8030-0 for use on all NATO destroyers and cruisers armed with the AEGIS defense system. RejeX can also be applied to windshields (glass, Lexan, acrylic, etc.) to repel rain and make bugs splats easier to remove. it is even effective against the dreaded love bugs! RejeX also provides exceptional UV protection. This very thin film, only tenths of a micron thick, reduces adhesion of all common contaminants such as road grime, exhaust, oil, bug splats, bird droppings, brake dust, tree sap, pollen, tar and grease.

Where to buy rejex wax